How Do You Make a Shipping Label? My 6-Step Checklist for Office Admins
- Step 1: Inventory what you actually ship, not what you think you ship
- Step 2: How do you make a shipping label (without buying software you donât need)
- Step 3: Verify who your packaging vendor is now, not in 2018
- Step 4: Know what each packaging item is actually for before you reorder
- Step 5: Handle one-off requests without quietly absorbing them
- What I got wrong â and what I still check
Shipping landed on my desk in 2020, bundled in with facilities and travel because âtheyâre all kind of the same thing, right?â Iâm the office administrator for a 170-person company. I manage roughly $42,000 a year in packaging and shipping spend across seven vendors â give or take a few thousand depending on the quarter â and I report to both operations and finance. This is the six-step checklist I run before I order labels, bags, or boxes. First setup takes about 45 minutes. After that itâs a ten-minute review every Monday.
Step 1: Inventory what you actually ship, not what you think you ship
Spend one week writing down every item that leaves your building. Boxes, envelopes, tubes, that weird flat package the design team sends to clients. Youâll be surprised at the range. When I started, I assumed we were mostly sending documents. Turned out about 60% of our volume was sample parts in small boxes, and Iâd been buying the wrong envelopes for a year.
Then check it against carrier specs. USPS defines a letter as 3.5" Ă 5" minimum to 6.125" Ă 11.5" maximum, and a large envelope (flat) as 6.125" Ă 11.5" to 12" Ă 15", with a 0.25" thickness cap for letters and 0.75" for flats (USPS Business Mail 101). Pricing effective January 2025: a First-Class Mail letter at 1 oz is $0.73, a large envelope is $1.50, and each additional ounce on a large envelope is $0.28 (usps.com/stamps). Those numbers matter because they set your baseline â if a package is creeping over 3.5 oz, youâre probably better off with a flat-rate option.
Checkpoint: you should end up with three buckets â envelopes, small parcels, oversized items â and a rough count for each. If you canât fit your shipping into three buckets, youâre overcomplicating it.
Step 2: How do you make a shipping label (without buying software you donât need)
This is the question I get asked most, and the honest answer is that you probably donât need a $200/month shipping platform if youâre under 100 packages a month. Hereâs the workflow that actually works for one admin and one printer.
Weigh and measure before you open any tool
A $25 kitchen scale and a tape measure handle 90% of office packages. Weigh the packed box, not the individual item â Iâve watched people weigh the product, then get blindsided by dimensional weight charges at pickup.
Pick carrier and service on the same screen
USPS Click-N-Ship, UPS, FedEx, or a reseller like Pirate Ship all do address validation and rate comparison. For domestic parcels under 2 lb, USPS Ground Advantage or Priority Mail Flat Rate is usually the simplest call. Donât overthink the rate optimization until youâre shipping consistently above 50 packages a week.
Print on the right stock
Plain paper plus clear tape technically works, but it looks amateur and the tape can smear thermal ink. Label sheets â the vinyl-ish adhesive kind, not the paper ones â hold up better in rain and heat. If youâre shipping to a humid climate, the paper labels will bubble and the barcode will scan badly at the carrier hub.
My first attempt took about twenty minutes â okay, closer to forty, because I printed the label at 100% and the barcode got clipped at the margin. Print at actual size and leave the scanner margin alone.
Checkpoint: scan the barcode with your phone before the package leaves the desk. If your phone canât read it, the carrier scanner at the hub probably wonât either.
Step 3: Verify who your packaging vendor is now, not in 2018
This one cost me time and a rejected PO. If you buy industrial or healthcare packaging, the AmcorâBemis deal is the example youâll run into. Amcor completed its acquisition of Bemis Company in June 2019. The combined company trades on the NYSE under AMCR, and Bemis Companyâs old stock ticker (BMS) stopped trading because the entity became part of Amcor. So if youâre searching for âbemis company, inc. stock ticker,â youâre looking for a symbol that no longer exists â what you want is AMCR.
Why does this matter to an office admin? Because a lot of B2B procurement systems still list the vendor by its pre-acquisition name. If your system says âBemisâ but the invoice arrives under an Amcor division, finance will flag it and youâll spend a week chasing down a W-9 that should have been on file.
Hereâs the mistake I made: I assumed the name on the old product catalog still matched the legal entity that would invoice us. Didnât verify. Turned out the remit-to address had changed after the Amcor Bemis acquisition, and our PO listed the wrong tax ID. Finance rejected the expense report and I had to eat the delay. Now I match vendor legal name, tax ID, and remit-to address against the W-9 before any order over $1,000.
Checkpoint: one column in your vendor sheet for âlegal entityâ and one for âbrand name.â If those are the same for every vendor, you havenât checked hard enough.
Step 4: Know what each packaging item is actually for before you reorder
Take the clear body bag question. We use clear bags for return samples that need a visual check before intake â the receiving team can see whether the part is damaged without opening the seal. Thatâs a legitimate use. But a clear body bag is not a substitute for a proper poly mailer when youâre shipping anything that needs opacity or puncture resistance, and itâs not appropriate for items with privacy or contamination concerns.
I recommend this for visual-inspection returns, but if youâre dealing with anything that needs moisture barrier or sterile handling, youâre in the other 20% and you need a different spec entirely. Thatâs not a knock on the product â itâs just the wrong tool for that job.
One more thing: if the bag is labeled ârecyclable,â make sure the claim holds. Per the FTC Green Guides (16 CFR Part 260), recyclable claims should be substantiated by access â generally, at least 60% of consumers should have access to recycling facilities for that material. Donât repeat a supplierâs green claim on your own internal catalog without checking it.
Checkpoint: before reordering any bag, ask the receiving team one question: âwhat has to be visible, and what has to be protected?â
Step 5: Handle one-off requests without quietly absorbing them
Last quarter someone asked me for full car vinyl wrap prices because they wanted to wrap the two company vans for a trade show. For the record, a full wrap runs about $2,500 to $6,000 depending on vehicle size and film quality â closer to $4,000 for a Sprinter. But thatâs a body shop job, not a packaging purchase. I said so, handed over three local shops, and wrote down who owned the request after I passed it off.
Same week, I told a vendor âas soon as possible.â They heard âwhenever convenient.â Result: delivery two weeks later than Iâd promised the team. Now I write actual dates in emails, even when it feels excessive.
Checkpoint: for any request outside your category, write down the handoff owner and date. If you donât, it becomes yours by default.
What I got wrong â and what I still check
When I took over purchasing in 2020, I found a great price from a new vendor â about 25% cheaper than our regular supplier. Ordered a full quarterâs worth of mailers. They couldnât provide a proper invoice, just a handwritten receipt. Finance rejected the expense report and I ate $2,400 out of the department budget. Now I verify invoicing capability before I place any order, no matter how good the quote looks.
I also went back and forth for two weeks between our established vendor and a cheaper alternative. The established one offered reliability; the new one offered savings. I ultimately chose reliability because the project was too important to risk â and that turned out to be the right call when the new vendor had a stockout two months later.
Last thing, and itâs the one most admins miss: under federal law (18 U.S. Code § 1708), only USPS-authorized mail may go in a residential mailbox. If your company is drop-shipping to home addresses and a courier is placing packages in mailboxes, thatâs a compliance issue, not a convenience. Use the door, not the box.
None of this is glamorous. But the difference between a smooth shipping desk and a chaotic one is mostly these six checks â not the software, not the vendor, and definitely not the lowest quote.
Ready to Transition to Sustainable Packaging?
Our sustainability team will provide a free packaging assessment and recommend eco-friendly alternatives. Use code SAVE15 for 15% off your first sustainable packaging order.